Key takeaways
- Burn off and brush the grates after every cook while they are still warm.
- Clean the exterior with the grain using mild soap or a stainless cleaner. Avoid chlorine, steel wool and harsh abrasives.
- Empty the grease tray regularly. Most grill fires start in neglected grease.
- Surface rust spots are usually contamination or chlorine, not a failing grill, and can be removed.
Why stainless still needs care
Stainless steel resists rust because of a thin, invisible chromium oxide layer on its surface. That layer repairs itself as long as the steel is clean and exposed to air. Grease, salt, pool chemicals, fertilizer, and iron particles from steel brushes or nearby construction can interrupt it and cause brown spots or "tea staining." Regular cleaning keeps the protective layer working.
Higher grades help. 304 stainless resists corrosion much better than 430 or 443, especially near pools and the coast, but every grade looks better and lasts longer with routine care.
After every cook
- Turn all burners to high with the lid closed for 10–15 minutes to burn off residue.
- Brush the grates while warm with a quality grill brush or scraper. Replace worn bristle brushes so no loose wires end up on the grates.
- Turn off the burners and close the gas supply (tank valve or shutoff).
- Once cool, wipe the exterior and control panel to remove grease and fingerprints.
Every month or so (depending on use)
- Empty and clean the drip tray. Line it with foil or disposable liners if your grill allows. Built-up grease is the leading cause of grease fires.
- Clean flame tamers and heat plates. Scrape off carbon and grease so heat spreads evenly.
- Check burner ports. Clear any blocked ports with a paper clip or a soft brush. Uneven or yellow flames often mean blocked ports or spider webs in the venturi tubes.
- Clean the exterior with the grain. Use warm water with mild dish soap or a stainless-specific cleaner on a soft cloth, wiping in the direction of the polish lines. Rinse and dry.
What to avoid
- Chlorine bleach and chloride cleaners: they attack the protective layer and cause pitting.
- Steel wool and carbon-steel brushes on exterior panels: they leave iron particles that rust.
- Oven cleaner on exterior stainless or painted parts.
- Covering a hot or wet grill: trapped moisture and heat speed up staining.
Removing light rust and tea staining
Small brown spots are usually surface contamination rather than the grill rusting through. Use a non-abrasive stainless steel cleaner or a paste of baking soda and water, rub gently with the grain using a soft cloth or non-scratch pad, rinse and dry. For stubborn staining, a cleaner containing oxalic acid works well; always follow the product directions and test on a small area first.
Before storing for the season
- Do a deep clean of the grates, flame tamers, firebox and drip tray.
- Turn off and disconnect the gas supply; store propane tanks outdoors, never in a garage or basement.
- Make sure the grill is completely dry, then use a breathable, fitted cover.
- Inspect hoses and connections for cracks, and check for leaks with soapy water before the first cook of the new season.
A fitted cover is one of the simplest ways to extend the life of any outdoor grill. Browse grill covers.




